Selecting An Automatic Pcb Assembly Machine
If you are looking for ways on how to cut your custom printed circuit boards (PCBs) at an affordable price, you can opt for making a custom PCB. A customized PCB not only provides increased functionality to your product, it also helps you in creating impressive business branding. However, making a custom PCB is an expensive affair as compared to mass-produced PCBs. If you want to cut down the cost of making a custom PCB, you should consider some factors. These factors will help you in choosing the right equipment suitable for making a custom-made PCB at low cost per unit.
Three main types of components available in an automatic pcb assembly machine are available in the markets these days. If you liked this short article and you would such as to receive additional facts relating to dunlop manufacturing inc pcb kindly check out the web site. These include front panel, a top panel and rear panel. The type of materials used in making a PCB can be chosen according to your requirements. The price of each material can be easily determined by considering the number of layers, number of plies and its thickness.
Among the common components used in automatic pcb assembly machine are feeders, heat shields, solder masks, heat tape, fasteners, push-fit trays, die cuts and many more. Depending upon the size and shape of the product, appropriate feeders and heat shields should be selected. A small hot plate may not be suitable for large electronic components. Similarly, a big die cut may not be suitable for a small component. So, the selection of appropriate feeders and heat shields is necessary for proper functioning of the machine.
It is also essential to check the presence of the feeder and heat shield at the time of making the selection. If you do not find any feeder or heat shield, it is advisable to select a smaller sized component, as it will increase the overall production cost. Another important factor, which should be checked at the time of making selection is the distance between the two planes. If the distance is less, it will be easier to keep the components perfectly aligned.
Some assembly machines have a double sided tape feeder, which can be fitted with either dry or wet tape. Automatic pcb manufacturers offer tape feeder of various diameters. A considerable variation in feed rates is available with wet tapes. However, they tend to work more slowly and thus it may not be possible to complete a complex assembly without any pause.
A final consideration in making automatic pcb assembly is the speed of the feeder and the jamming action. Fast pcb manufacturers tend to use higher speed processors and therefore jams become more frequent. It is advisable to choose a machine with a slower jamming action, as it will increase production output and reduce the repair cost. Apart from these factors, there are a number of other factors that need to be considered, before making a selection.
