Cam Groove Couplings

Cam groove couplings are very unique and used mainly for gas turbines. These cam coupling assemblies eliminate the need for a camshaft. This assembly is made up of two halves that fit together at right angles to each other and are connected through a cam groove in the middle. They are most commonly used on diesel engines since it is believed that this type of coupling reduces power losses. This article provides information on the different types of cam grooves and their application.


The first type is called the cam lock ring. When you have any kind of inquiries regarding wherever and the best way to work with shuncheng acoples camlock, it is possible to e-mail us from the webpage. It is a one-piece assembly, similar to the camshaft, and has no external threads. It runs parallel to the camshaft axis and is designed to force the cam into a stationary position. The design of the cam lock coupling assembly is such that the valve can be adjusted either clockwise or counterclockwise depending on the needs of the engine.


Another type of cam groove couplings is called the four-inch cam lock. This one is the basic model and is available in many variations. It is usually installed at the lower valve spring or T-valley position to prevent displacement of the cam lobe. The four-inch camshaft geometry is similar to the two-inch camshafts and is found in many types of diesel engines.


The other type is the six-inch cam groove. This one is very popular since it requires minimal maintenance and is also more resistant to the wear and tear of the engine. They are manufactured with shorter camshaft lengths and it is also shaped similar to the camshaft. They can be positioned in an X, Y or Z configuration. This specific type of car has a keyed-in timing mechanism which is very robust. However, it is also susceptible to excessive creep because of incorrect camshaft alignment.


Cam groove couplings are also used to correct the tilt and angle of the camshaft. This is mainly done by replacing the camshafts with new ones. There are also hydraulic camshaft lift kits that are equipped with a hydraulic cam drive. These lifts are very reliable but expensive.


Cam groove couplings are made of various materials like metal, stainless steel and plastic. They can be installed at the cam or cylinder banks for maximum efficiency. However, the installation process should be precise and careful so as to avoid damaging the couplings. Improper installation may damage both the camshaft and the couplings causing severe damages that will need extensive repairs. Only skilled technicians should install this system.